LEED points available from
using Partition Systems
products
LEED section and credit
description Materials & Resources Most of the
materials used in our wall systems contain recycled materials up to
1 up to
1 up to
1
PS-350
Corporate
Executive
Credit 2.1
& 2.2 Construction waste
management
Very little
of the waste produced during installation would need to be sent to landfill,
most can be locally recycled.
up to
2
up to 2
up to 2
Credit 3.1
& 3.2 Resource
Reuse
When the
building is renovated our wall systems can be taken apart and the materials
re-used in the new configuration.
up to
2
up to
2
up to
2
Credit 4.1
recycled
content
Credit 5.1
Regional
materials
Well over
10% of the materials are manufactured within Alberta, and a good portion are manufactured
in Edmonton
up to
1
up to
1
up to
1
Indoor Environmental Quality
Credit 4.1
& 4.2 Low-emitting
materials
Our
installation process uses very little if any adhesives or sealants on site. The
wall surfaces are pre-finished in the factory so there would be little if any
VOC’s given off on site.
up to
2
up to
2
up to
2